1. manualzz.com
  2. industrial & lab equipment
  3. measuring, testing & control

NDD EasyOne 2010

Manuali e guide per l''utente per NDD EasyOne 2010. Abbiamo trovato 5 manuali per download gratuiti Operator's manual, User manual, User Guide

Below you will find brief information for Spirometer EasyOne 2001, Cradle EasyOne 2010. This manual will help you to get started with the EasyOne 2001 Spirometer, a high quality spirometer that minimizes the need for maintenance due to its unique ultrasound technology. The EasyOne 2001 does not need calibration and remains consistently accurate over years. The spirette breathing tube assures perfectly hygienic conditions for every patient at low cost even if the spirometer is frequently used. The EasyOne device also includes a Cradle EasyOne 2010 (optional) that lets you connect the EasyOne 2001 to a printer or PC.

Caratteristiche principali

  • Ultrasound technology

  • No calibration needed

  • Consistent accuracy

  • Hygienic spirette breathing tube

  • Direct printing

  • PC connectivity

pagine: 32 NDD EasyOne 2010 Operator's manual

Marca: NDD Categoria: Measuring, testing & control Dimensione: 3 MB

Lingue: English

Indice

Apri manuale

Altri manuali e documenti

31 pagine

User manual

Lingue: English

26 pagine

User Guide

Lingue: English

32 pagine

User manual

Lingue: French

30 pagine

User manual

Lingue: Spanish

Risposte e domande frequenti

How do I connect the EasyOne 2001 to a printer?

You can connect the EasyOne 2001 to a printer using the USB cable. The PictBridge port is normally located on the front side of the printer. You can also connect the EasyOne to a printer through the Cradle EasyOne 2010 by using the USB cable (in this case the USB port is normally located on the back side of the printer).

What is the spirette breathing tube?

The spirette breathing tube is a disposable tube that assures perfectly hygienic conditions for every patient. It is easily removed by pushing it up from the bottom.

What kind of batteries are needed for the EasyOne 2001?

The EasyOne 2001 requires two AA alkaline batteries. You should only use alkaline batteries and remove them from the battery compartment if you intend not to use the instrument for a long period.

How do I calibrate the EasyOne 2001?

Calibration and servicing may be carried out only by ndd staff. Do not open the instrument.

Domande e risposte

A A A

How is the calibration of the EasyOne spirometer checked?

To check the calibration of the EasyOne spirometer, use the calibration check function with a syringe. You'll need an ndd calibration adapter and a calibration syringe, ensuring the correct syringe volume is entered in the instrument’s configuration setting.

Here’s how:

  1. Choose “Check calibration” in the main menu.
  2. Connect the spirometer using the calibration adapter and syringe, ensuring the piston is fully inserted.
  3. Press ENTER.
  4. Wait for the baseline to be set (audible signal).
  5. Perform one full inspiratory pump stroke followed by one full expiratory pump stroke at a moderate speed.
  6. After the maneuver, the display will show "Accuracy confirmed" along with the percentage deviation and average flow velocity.

What does it indicate if the calibration check of the EasyOne spirometer fails?

If accuracy is not within ±3% during the calibration check, consult the troubleshooting instructions or your EasyOne dealer.

Is field service or internal calibration recommended for the EasyOne spirometer?

Field service or internal calibration is not recommended, and the cover should only be removed by qualified service personnel.

annuncio pubblicitario